Start up
- Switching on the pump
- Inserting the syringe
- Setting a rate
Note: Always use the device with the smallest possible syringe, provided the therapy permits this.
Rate Change
Modify a rate during without stopping a therapy.
Reset Therapy
Rate Calculation
Enter volume and time. The rate is automatically calculated.
Any values still missing are automatically calculated and displayed.
Bolus
Press the Bolus key twice and hold it.
Fluid is delivered as long as the key is pressed.
Note: This function is available only while pump is infusing.
Pressure Level
It may be necessary to change the pressure alarm limit due to various influencing factors, e.g. syringe friction, extension line length and inner diameter, fluid viscosity and the filter used in the system set-up.
Does Rate Calculation
The Dose calculation function is used to calculate the delivery rate in ml/h based on the dose parameters entered.
Standby
In the event of longer interruptions, the user has the option of retaining the set values and continuing the infusion at a later time.
Drug Library
Up to 3,000 freely selectable drug names, including corresponding therapy data and information and up to 10 concentrations per drug in 30 categories, can be stored.
The drug database can be used to select a drug name with saved therapy data.
Turn Off
The device cannot be switched off if a disposable item is inserted. Instead it will go into standby mode.
Infusomat
- Switching on the pump
- Inserting the infusion line
- Setting a rate
- Stopping a therapy
- Removing the infusion line
- Switching off the pump
Fixation
Mounting a Station compact plus to an IV pole.
Note: Ensure that no pumps are docked when assembling a Station compact plus.
Station
Mounting a Station compact plus to an IV pole and fixation of an additional Sation compact plus on top.
Stacking
To insert a pump into a Station compact plus, position the pump above one of the slots and slide the pump in the direction of the plug connection.
To remove a pump from the Station compact plus, press the release button on the side of the pump and pull the pump out.
Pump Stacking
Mounting of a pump on an IV pole and stacking of another pump.
